敬告廣大客戶：
      樹脂流動性測試系統中的樹脂流動性壓機系專利產品。專利號：ZL200520116721·5 、專利證書號：844352，我公司擁有其全部知識產權。目前發現市場上有劣質侵犯我公司知識產權的仿冒品。敬請?zhí)岱馈?/span>

樹脂流動性測試系統由一臺RF-2.0E型流動性試驗壓機,一臺RF-P1取樣沖模機和一臺RF-P2取樣沖模機組成。設計緊湊，外形美觀，符合美國IPC-TM-650標準中試驗方法2.3.17各項要求,用于測量半固化片的樹脂流動性測試。

 

RF-2.0E流動性試驗壓機（有經濟型和常規型二種）經濟型比較便宜、適合中小企業。   

 

1. 測試半固化片樹脂流動性
      2. 進口優質零部件組裝
      3. 壓縮空氣驅動
      4. 數字式顯示，溫度PID控制
      5. 操作簡便，無須特殊維護

      The RF-2,OE Resin Flow Press is desighed to meet the requirements of IPC-TM-650 Method2.3.17for determing the resin flow Percent of prepreg as well as for "scaled flow testing"

         1. Special design for resin flow testing of prepreg
         2. All quality parts build up in China
         3. Pneumatic operation
         4. Trouble-free equipment requires no special maintenance

 

  規范：
       ?型號：RF-2.0E
       ?壓力：2.0T最大
       ?開擋數：1
       ?擋距：150mm
       ?熱板尺寸：200×200mm
       ?熱板厚度：40mm
       ?工作溫度：200℃
       ?控溫精度：±2.0℃
       ?熱板功率：1.1KW/塊,2.2KW總功率
       ?供電要求：220V，0Hz，單相
       ?供氣要求：6bar
       ?重量：220kg大約
       ?尺寸（深×寬×高）：340×780×900mm

         Specification:
           ?Model: RF-2.0E
           ?Pressure: 2.0Tmax
           ?Daylight number: 1
           ?Daylight (stroke) 150mm
           ?Heating platen size: 200×200mm
           ?Heating platen thickness:40mm
           ?Operation temperature: 200℃
           ?Temperature accuracy: ±2.0℃
           ?Heating platen capacity:1.1KW/ea,2.2KW total 
           ?Operating power:220V,50Hz,single phase
           ?Weight:220kg
           ?Dimension（D×W×H）:340×780×900mm

 

  流動性試驗取樣沖模機
          Resin folw Testing Sample Punch Model RF-P1&RF-P2

        RF-P1和RF-P2樹脂流動性取樣沖模機是專門用于沖取樹脂流動性試驗試樣的機器。符合美國IPC-TM-650 2.3.17所提出的要求。
        RF-P1是電動的，配有專門沖取直徑為81.10mm(3.192英寸)園形試樣的沖模。
        RF-P2是氣動的，配有專門切取4”×4”半固化片試樣的模具。
        模具均是優質材料精制。機器操作簡單。

 

  The RF-P1 and RF-P2 Resin Flow Testing Sample Punches are designed to punch samples for resin flow percent of prepreg testing.The units meet the requirements of IPC-TM-650 2.3.17
          The RF-P1 is electrical operation and supplied with Punch die set that special made for cutting a sample circle 81.10mm[3.192inch]in diameter.
          The RF-P2 is pneumatic operation and supplied with punch die set for cutting 4”×4”prepreg sample.
          Both dies are quality made and the punches are simple operation

 

RF-P1技術參數

型號 Model	RF-P1
能力 Capacity	20KN
行程  Stroke	40mm
模具尺寸 Die diameter	81.10mm/3.192″
電源 Power supply	220V 50HZ 370W
尺寸 Size	48×32×54cm
重量 Weight	95kg

RF-P2技術參數

型號 Model	RF-P2
能力 Capacity	40KN
行程  Stroke	40mm
模具尺寸 Die diameter	4″×4″
電源 Power supply	220V 50HZ
尺寸 Size	37×37×67cm
重量 Weight	140kg
供給壓縮氣 Air supply	6-8bar